Lines
for polished
/
thermoforming
sheets: Technology
Reifenhäuser
meets the
requirements
of modern
thermoforming
sheet
products
with
innovative
and
economical
concepts.
Reitruder
Reitruder
RZE
Twin-screw extruder with co-rotating screws, especially suitable for manufacturing PET and with a high filling degree, from minerals to wood flour. PET is showing great growth rates on the market for soft drink and mineral water bottles. The resulting recycling material can be processed with the Reitruder without needing pre-drying sheets.
Reitorque
Reitorque
Thanks to their compact
design, coextruders provided with Reitorque technique are especially suitable for use in multi-layer production lines. This extruder series is distinguished by the following features:
30 % reduction in
space
Torques of 300 to 11.000 Nm at the usual extrusion speeds
Low maintenance requirements and high machine operability
Minimised noise (values below 78 dBA)
Simple screw change, to the front or back of the extruder
REIcofeed
II
Coextrusion block
REIcofeed II
The patented
REIcofeed system offers maximum flexibility regarding various layer properties for the extrusion of advanced multi-layered
composites. REIcofeed coextrusion adapters are available for the extrusion of 2 - 9 layered composites.
The dimensions of single-layered film can be adjusted during operation by means of a slider system.
ISR II
A significant reduction in change-over times for the sheet die-head has been achieved by means of Reifenhäuser's patented ISR II technology (internal slot regulation).
The sheet thickness or the size of the die gap is set by means of the flexlip in the upper die part and by means of a movable or exchangeable lip in the lower die part, across the entire discharge width of the melt.
