Blown film lines: Type overview

The Reifenhäuser family enterprise, with its "Extrusioneers^®", is your competent partner for realising highest demands in the field of packaging for consumer goods and industrial use.
With the FILMTEC^® product series, all customer requirements can be met, from sack film to agricultural films and dump liner sheeting, from single-layer lines up to 7-(9-) layer barrier film lines.
Our lead in technology and expertise is secured by Reitorque, our sizing basket design, contactless reversing bar technology and new winder technology.
These lines are characterised by economy, reliability and excellent quality.
With our worldwide service branches and a 24-hour hotline, you have the full support of the parent company in Troisdorf at your disposal.

3layer blown film line FILMTEC 3-1700 IBC
for laminating film

equipped with newly developed components:

	3 gearless Reitorque extruders of space- and energy-saving configuration
	Compact 3-layer film-blowing die-head, which can produce a broad range of complex film structures with good basic tolerances
	Sizing basket in a new version with air conduction bush for contactless film guiding by means of an air cushion, fed by compressed air without using blowers
	Stable reversion system with microporous reversing bars that are powered by compressed air and ensure contactless, streak-free film guiding
	UFA III winder with special gap winding for dull and sticky films, for producing optimal film reels

3-Layer blown film line FILMTEC 3-5000-IBC
for agricultural film (greenhouse, tunnel, mulching films)

equipped with:

	3 extruders Ø 150 mm, Ø 200 mm, Ø 150 mm with a plasticising capacity of > 2500 kg/h
	3-layer blown film die-head with die insert of 2200 mm diameter
	High-performance air cooling ring for >2000 kg/h production capacity
	5000 mm line width and 35 metres construction height
	4-ply folding unit (C-type folding) for a circumference of max. 18,500 mm
	FAC 5000 short-yardage winder with centre winding, without winding shafts, suitable for automatic reel change and adhesive-less web lay-on, for films up to 200 µm thickness and max. 8-ply folding

3-Layer blown film line FILMTEC 3-1000-IBC-FFS
for heavy-duty sack production

equipped with:

	3 gearless Reitorque extruders of space- and energy saving design
	Compact 3-layer blown film die-head which can produce a broad range of complex film structures with good basic tolerances
	High-performance air cooling ring for >300 kg/h production capacity
	6-roll haul-off unit including 4 cooling rolls for highest folding seam strength
	SFA winder for film reels of up to 1500 mm

7-Layer blown film line FILMTEC 7-1700-IBC
for barrier films (foodstuff and healthcare packaging)

equipped with:

	7 extruders for processing of polyolefins, EVOH and PA without the need for a tightest change
	Compact HDS 7-layer die-head (Horizontal Distribution System) for lowest basic tolerances of individual and total layer thicknesses in different, very complex composites
	Reicoflow II thickness control system for lowest thickness tolerances
	Very stable and exact film guidance for highest requirements (e.g. stiff and thick film structures including EVOH and PA)